o Willingness to travel as needed for installation, start-up, or third-line service. o Language skills: English, Dutch, German (preferred). o You must have a valid work permit for the Netherlands that does not require employer sponsorship, as we are not a recognized sponsor.
Omexom is the VINCI Energies brand for energy infrastructures and, with currently around 25,000 employees, is continuously growing. Omexom’s services cover the entire spectrum of energy infrastructures: from generation, transmission, and conversion to the distribution of energy.
#Health: Your health matters to us – benefit from health days, company sports activities, office yoga, and free support from the pme Family Service. #CareForTomorrow: With our company pension scheme, you secure a financial advantage for the future – complemented by the option of occupational disability insurance.
#Health : Your health matters to us – benefit from health days, company sports activities, office yoga, and free support from the pme Family Service. #CareForTomorrow: With our company pension scheme, you secure a financial advantage for the future – complemented by the option of occupational disability insurance.
Our people at JLL and JLL Technologies are shaping the future of real estate for a better world by combining world class services, advisory and technology for our clients. We are committed to hiring the best, most talented people and empowering them to thrive, grow meaningful careers and to find a place where they belong.
Your Tasks Design and develop/modify the electrical power generation and distribution system and equipmentRequirements management in accordance with ED-79/ARP4754APrepare Part 21 compliance documentation (MoC 0-9)Prepare and assess safety analyses at system and equipment levelPrepare specifications and other type design documentsBe the point of contact for external suppliers in technical mattersParticipate in EASA panel meetingsSupport qualification, ground and flight test activitiesPerform technical trade studiesDevelop technical solutions to in-service problems Your Qualifications Master’s Degree or Diplomingenieur in Aerospace More than 5 years of experience in aerospace industry Experience of at least one new aircraft development pro-gram Experience in Electrical Load Analysis and ELA-Tools Familiar with EASA Part 21J and CS-25/FAR 25 and opera-tionals requirementsVery good English language skills and good German language skillsExcellent team spirit, communication and interpersonal skillsWill to to assume responsibilityCapable of structuring and organizing work in efficient and effective mannerStrong analytical skills, hands-on mentalityCreativity and the ability to act independentlyTechnical problem-solving and decision-making ability What we offer: Collaboration in a fast-growing, international aerospace company Flexible working hours and flextime options Xtended Engineering GmbH connects qualified engineers with companies from industry and business.
#Health: Your health matters to us – benefit from health days, company sports activities, office yoga, and free support from the pme Family Service. #Holiday: We offer you 30 days of vacation per year based on a full-time position, plus December 24th and 31st off. #OneCompany: Stronger together – with over 10,000 employees from 95 nations, we promote an international and collegial corporate culture.
#Health : Your health matters to us – benefit from health days, company sports activities, office yoga, and free support from the pme Family Service. #Holiday: We offer you 30 days of vacation per year based on a full-time position, plus December 24th and 31st off. #OneCompany : Stronger together – with over 10,000 employees from 95 nations, we promote an international and collegial corporate culture.
Independently working though projects as well as maintenance and service assignments at customer sites are daily tasks. Your profile At least 3y of experience with advanced programming in at least two of ABB, KUKA or FANUC robots (SEPRO and VIPER are a plus) Familiarity with the commissioning of robots into new and existing systemsAble to establish the robot communication with PLC and equipmentExpertise to create and modify path motions and program logicStrong electrical and mechanical backgroundGood troubleshooting skillsExperience working with vision systemsAbility to do mechanical adjustments to EOATs and tooling basic mechanical knowledgeAbility to read electrical drawingsWillingness to travel domestically and internationallyExperience in PLC programming is a plus Additional information Competitive compensationGenerous Healthcare (medical, dental, vision) 401K match (after 1 year)10 days PTO, 10 Sick days and 10 Holidays
Strong support for all launch activities On site analysis for electrical failures and software failures Perform joint pre-analysis and pre-rejection of parts at customer locations and support activities to reduce part returns and related costs Coordinate the transfer of return parts from related customer location(s)/warranty center(s) to the appropriate production location and, if applicable, register complained parts in the related system Propose and implement containment actions and corrective measures, trace affected products, notify impacted customers, analyze lessons learned and preventive actions Coordinate and control sorting, rework and reflash actions - where necessary with support from third-party service providers - in alignment with the customer and the involved Business Units to minimize production disruptions and reduce costs Manage and coordinate if applicable to a Customer Service Engineer Team across multiple customer locations within an assigned region Support product changes, customer plant trial runs, and safe launch activities at customer facilities Perform and coordinate reflash activities at customer plant Quality-Project-Experience Experience in Customer Relationship Management Language: German and Englisch required, Portuguese an advantage Experienced in SW and electrical analysis tools (CANoe, OBD tools etc.)
Strong support for all launch activitiesOn site analysis for electrical failures and software failuresPerform joint pre-analysis and pre-rejection of parts at customer locations and support activities to reduce part returns and related costsCoordinate the transfer of return parts from related customer location(s)/warranty center(s) to the appropriate production location and, if applicable, register complained parts in the related systemPropose and implement containment actions and corrective measures, trace affected products, notify impacted customers, analyze lessons learned and preventive actionsCoordinate and control sorting, rework and reflash actions - where necessary with support from third-party service providers - in alignment with the customer and the involved Business Units to minimize production disruptions and reduce costsManage and coordinate if applicable to a Customer Service Engineer Team across multiple customer locations within an assigned regionSupport product changes, customer plant trial runs, and safe launch activities at customer facilitiesPerform and coordinate reflash activities at customer plant Quality-Project-ExperienceExperience in Customer Relationship ManagementLanguage: German and Englisch required, Portuguese an advantageExperienced in SW and electrical analysis tools (CANoe, OBD tools etc.)
Prepares concise, accurate, professional and timely Equipment Acceptance Reports, Service Work Reports, Expense Reports and other support documentation for customer visits; communicates with KHS internal staff to report on service activities; completes and submits reports within 3 weeks after the end of a job.
Prepares concise, accurate, professional and timely Equipment Acceptance Reports, Service Work Reports, Expense Reports and other support documentation for customer visits; communicates with KHS internal staff to report on service activities; completes and submits reports within 3 weeks after the end of a job.
Your Contribution Provide for corrective, preventative, predictive, safety and emergency repairs to electrical machinery and electronic equipment utilized in LNS's manufacturing processes.Ability to troubleshoot facility wiring, electronic controls, including servo/stepper motor controls, process equipment and general mechanical equipment.Completes accurate records via an Enterprise Asset Management (EAM)Troubleshoot machine and system failures on a timely basis in a production environment; provide appropriate corrective actions.Use schematics, blueprints & diagrams to find the sequence of operations to aid in effective troubleshooting of electronic hardware, vacuum systems, hydraulic systems, basic mechanical systems, and pneumatic systems.Calibrate electronic controllers and maintain accurate records.Provides project support on internal projects.Assist Engineering personnel in conducting process and project evaluation and problem solving, must work in a team environment.Assist in building and grounds maintenance when needed.Moves, assembles, installs, adjusts, repairs and services all standard production machinery and equipment.Works overtime as required and responds to emergency call-ins. Your Profile High School Diploma or equivalent.Minimum two (2) years’ electromechanical training and PLC knowledge for troubleshooting and repair for production equipment.Four (4) years’ experience in mechanical, electrical repair, and PLC troubleshooting and repair for production equipment.Ability to read schematics, blueprints and diagrams.Must be able to read, write, and speak English.Effective verbal and written communication skills.Computer proficiency and experience using Microsoft Office software.Self-motivated and results oriented.Ability to work in a team oriented environment.Good manual dexterity and hand/eye coordination.Due to the nature of work performed at this facility, US Person status may be required.
#Health: Your health matters to us – benefit from health days, company sports activities, office yoga, and free support from the pme Family Service. #Holiday: We offer you 30 days of vacation per year based on a full-time position, plus December 24th and 31st off. #OneCompany: Stronger together – with over 10,000 employees from 95 nations, we promote an international and collegial corporate culture.
#Health : Your health matters to us – benefit from health days, company sports activities, office yoga, and free support from the pme Family Service. #Holiday: We offer you 30 days of vacation per year based on a full-time position, plus December 24th and 31st off. #OneCompany : Stronger together – with over 10,000 employees from 95 nations, we promote an international and collegial corporate culture.
Systems Installation & EWIS (m/w/d) in Weßling Willkommen bei Aviation Industry Personnel SERVICES GmbH, dem Experten für Service- und Personaldienstleistungen in der Luftfahrt. Wir führen Menschen zusammen, um hohe Ziele zu erreichen.
Fluent in English listening, speaking and writing that need to cooperate with USA & Europe colleagues Experience of cooperate with customer service with knowledge of how to fulfill customer's desire for customer complain.Bachelor or above in software engineering, computer science or mechatronics
We support you and our customers in all areas of structural and civil engineering, facility management, large-scale industrial construction, technical building equipment and real estate management. As a national and international personnel services provider, we can offer you both short-term projects and long-term opportunities in your local area, nationwide and around the world – all free of charge to you.
Participates in quality efforts by inspecting components and functional items on checklist and signs off on machine Provide technical support for field service technicians during installation of the machine Your Qualifications Associate's degree (A. A.) or equivalent from two-year college or technical school 3 to five years complex electro mechanical equipment assembly experience.
#Health: Your health matters to us – benefit from health days, company sports activities, office yoga, and free support from the pme Family Service. #Holiday: We offer you 30 days of vacation per year based on a full-time position, plus December 24th and 31st off. #OneCompany: Stronger together – with over 10,000 employees from 95 nations, we promote an international and collegial corporate culture.
We support you and our customers in all areas of structural and civil engineering, facility management, large-scale industrial construction, technical building equipment and real estate management. As a national and international personnel services provider, we can offer you both short-term projects and long-term opportunities in your local area, nationwide and around the world – all free of charge to you.
Participates in quality efforts by inspecting components and functional items on checklist and signs off on machine Provide technical support for field service technicians during installation of the machine Your Qualifications Associate's degree (A. A.) or equivalent from two-year college or technical school 3 to five years complex electro mechanical equipment assembly experience.
For the design and development of business-critical IT solutions in the enterprise environment, we are looking for your support.Studies in computer science, business information technology, electrical engineering or comparable practical experience in software developmentPractical experience as a software developer in the field of Team Developer or MS-AccessYou have a communicative attitude, are friendly, engaged and flexibleYou enjoy working in a team, are motivated and able to work under pressureGood knowledge of German and English, both written and spokenAs a service-oriented company, creativity and engagement of the employees are particularly important. The intensive interaction between management and employees creates a fruitful climate of trust.
Support to the nacelle factory, suppliers, global sourcing, SQA and service. Investigation of the latest developments on power electronics for future power stack designs. YOUR PROFILE: Degree in Industrial Engineering (Electrical) Professional experience in the field of electronic power converters for wind application.
Your Tasks Focus of this position is the development of modifications and the MRO support of the Do328 in-service aircraft (legacy). This includes the design and installation of electrical and mechanical systems.Perform and validate physical design and installation of systems into airframe with CAD and according DMU processes and fulfilling given installation requirements.
DIES SIND IHRE AUFGABEN: Sie arbeiten im Engineering-Kern und sind verantwortlich für komplexe Antriebsstränge, Hochleistungselektrik und die Systemintegration.Sie entwickeln und legen elektrotechnische Antriebssysteme vom ersten Konzept bis zur Serienreife aus.Dabei arbeiten Sie interdisziplinär mit den Bereichen Mechanik, Software, Fertigung und Service zusammen.Ein weiterer Schwerpunkt Ihrer Tätigkeit ist die Sicherstellung von Qualität und Sicherheit, insbesondere durch die Umsetzung relevanter Normen wie ISO 13849 und der Maschinenrichtlinie.Darüber hinaus übernehmen Sie die technische Verantwortung für unseren Bereich Electrical Design und tragen aktiv zur Weiterentwicklung der Abteilung bei.
Manages selected contractors to fulfil their scope of work on-site. Manages Field Service Technicians on-site. Manages schedule for installation and commissioning until acceptance of equipment, including scheduling KHS and non-KHS Field Service Technicians.
Your Contribution Ensures the maintenance of production equipment in order to guarantee output that meets customer requirements within optimal timeframes and costs.Develops, monitors, and updates the general maintenance plan (frequencies, types of interventions, responsibilities, machine availability).Ensures continuous maintenance and repair of installations, giving priority to critical machines.Performs failure analyses and implements the necessary corrective actions.Coordinates internal maintenance activities according to production needs.Organizes and monitors contracted interventions and external service providers.Documents and controls completed maintenance activities.Monitors the development of the machine fleet (numbering, machine files, location, equipment).Oversees technical building installations and safety systems.Manages spare parts, consumables, and supplier relationships.Optimizes the maintenance budget.Manages a team of 10 technicians (organization, prioritization, development).Ensures the implementation of EHS directives and compliance with laws and internal regulations regarding environment, health, safety, and accident prevention.
The Global Technical Academy develops, coordinates, and delivers technical and safety-related training within the Nordex Group. Internal colleagues, customers, and service providers are trained here. Since 2022, our training academy in Hamburg-Norderstedt has been certified by the Global Wind Organization (GWO) as a training provider.
As a company of the FORVIA Group, FORVIA HELLA stands for high-performance lighting technology and vehicle electronics and, with the Lifecycle Solutions Business Group, also covers a broad service and product portfolio for the spare parts and workshop business as well as for manufacturers of special vehicles. With currently around 36,500 employees at over 125 locations, the Company is active worldwide and generated adjusted sales of €8.1 billion in fiscal year 2024.
The Global Technical Academy develops, coordinates, and delivers technical and safety-related training within the Nordex Group. Internal colleagues, customers, and service providers are trained here. Since 2022, our training academy in Hamburg-Norderstedt has been certified by the Global Wind Organization (GWO) as a training provider.
Manages selected contractors to fulfil their scope of work on-site. Manages Field Service Technicians on-site. Manages schedule for installation and commissioning until acceptance of equipment, including scheduling KHS and non-KHS Field Service Technicians.
In doing so, you will act as the central interface between product management, manufacturing, IT, and our electronics manufacturing customers.Training or studies in electronics, electrical engineering, or a comparable technical fieldExperience in electronics manufacturing (e.g., SMT, THT, testing processes, etc.) or related areas (product management, work preparation, production)Ideally, you will have knowledge in one of the following areas: software (Valor Process Preparation, Valor Bom Connector) or machines (e.g., ASM, Fuji, Juki, Panasonic, Mycronics, etc.)IT affinity and knowledge of Windows networks, TCP/IP, databases (SQL, PostgreSQL, MS SQL)Good communication skills and technical understanding in interaction with various departmentsBusiness fluent in written and spoken German and EnglishAs a service-oriented company, creativity and commitment on the part of our employees are particularly important. The intensive cooperation between management and employees creates a productive climate of trust.
#Health: Your health matters to us – benefit from health days, company sports activities, office yoga, and free support from the pme Family Service. #Holiday: We offer you 30 days of vacation per year based on a full-time position, plus December 24th and 31st off. #OneCompany: Stronger together – with over 10,000 employees from 95 nations, we promote an international and collegial corporate culture.
#Health: Your health matters to us – benefit from health days, company sports activities, office yoga, and free support from the pme Family Service. #Holiday: We offer you 30 days of vacation per year based on a full-time position, plus December 24th and 31st off. #OneCompany: Stronger together – with over 10,000 employees from 95 nations, we promote an international and collegial corporate culture.
#Health : Your health matters to us – benefit from health days, company sports activities, office yoga, and free support from the pme Family Service. #Holiday: We offer you 30 days of vacation per year based on a full-time position, plus December 24th and 31st off. #OneCompany : Stronger together – with over 10,000 employees from 95 nations, we promote an international and collegial corporate culture.
Independent design of control and protection systems for high-voltage direct current (HVDC) transmission systemsImplementation of control software in MATLAB/SIMULINK and verification using simulation tools and real-time test environmentsPreparation of related design specifications, documentation, and effort estimationsClarification of technical requirements within project teams as well as with customers and suppliersRemote support during commissioning and in service cases Completed university degree in Electrical Engineering with a focus on power engineering or control engineering, along with relevant professional experienceStrong knowledge of converter and high-voltage technology, as well as plant, control, and automation engineeringSolid MATLAB/SIMULINK skills, including model-based implementation and verificationExperience in engineering automation systems, preferably SIMATIC TDC / S7Very good command of EnglishGerman language skills desirable You benefit from exclusive access to interesting companies and exciting projects in cooperation with Hays as a solid and stable partnerRemuneration in accordance with the industry collective agreement (GVP)Annual vacation entitlement of 30 daysWorking time account with the option of overtime pay or time off in lieuProfessional and trusting cooperation Ihr Kontakt Referenznummer 860505/1 Kontakt aufnehmen Telefon:+ 49 621 1788-4297 E-Mail: positionen@hays.de Anstellungsart Anstellung bei der Hays Professional Solutions GmbH
Are you looking for exactly the right level of appreciation and challenge? Then discover a career with real added value as Service Engineer worldwide (m/f/d) Corporate unit: Services | Location: Lengerich | Contract: Permanent Appointment | Start: asap YOUR TASKS For the worldwide Field Service, we are looking for Service Engineers for our locations all over the world.
Independent design of control and protection systems for high-voltage direct current (HVDC) transmission systems Implementation of control software in MATLAB/SIMULINK and verification using simulation tools and real-time test environments Preparation of related design specifications, documentation, and effort estimations Clarification of technical requirements within project teams as well as with customers and suppliers Remote support during commissioning and in service cases Completed university degree in Electrical Engineering with a focus on power engineering or control engineering, along with relevant professional experience Strong knowledge of converter and high-voltage technology, as well as plant, control, and automation engineering Solid MATLAB/SIMULINK skills, including model-based implementation and verification Experience in engineering automation systems, preferably SIMATIC TDC / S7 Very good command of English German language skills desirable You benefit from exclusive access to interesting companies and exciting projects in cooperation with Hays as a solid and stable partner Remuneration in accordance with the industry collective agreement (GVP) Annual vacation entitlement of 30 days Working time account with the option of overtime pay or time off in lieu Professional and trusting cooperation Ihr Kontakt Referenznummer 860505/1 Kontakt aufnehmen Telefon:+ 49 621 1788-4297 E-Mail: positionen@hays.de Anstellungsart Anstellung bei der Hays Professional Solutions GmbH
Are you looking for exactly the right level of appreciation and challenge? Then discover a career with real added value as Service Engineer worldwide (m/f/d) Corporate unit: Services | Location: Lengerich | Contract: Permanent Appointment | Start: asap YOUR TASKS For the worldwide Field Service, we are looking for Service Engineers for our locations all over the world.
Our highly specialised consultants can cater to your every wish and expectation and will prepare you for interviews and contract negotiations. Give it a try and learn what the market has to offer – our services are free of charge, non-binding and discreet! We look forward to hearing from you. Proactive participation in all phases of software development from feasibility studies through design,development, testing and bug fixing and maintenanceCollaboration within the Scrum-TeamsIndependent interaction with internal framework manufacturersBased on requirements and models, definition of software architecture, design and specifications, ultimately leading to implementationParticipation in the definition of work packages, their estimation and planning in a sprint-based agile environmentAdherence to a software development process including contribution to written deliverables and documentation Degree in a software related field such as software or electrical engineering or similarHands-on experience as Software Engineer, preferred in the regulated environment such as the medical device industryYears hands- on experience with C++ and Linux from the last project or positionStrong with Linux DockersExperience with CAN busSoftware architecture would be advantageous Internal career opportunities World-renowned biotech company Ihr Kontakt Referenznummer 865145/1 Kontakt aufnehmen Telefon:+41 44 225 50 00 E-Mail: positionen@hays.ch Anstellungsart Freiberuflich für ein Projekt
Abteilung Information: BW Papersystems, als Teil des Barry-Wehmiller-Konzerns, stellt Anlagen her, die Papier in Produkte für Verbraucher verwandeln - jeden Tag, auf der ganzen Welt. Wir bieten innovative Technologien, Service und Ersatzteile sowie jahrelange, weltweite Erfahrung in folgenden Bereichen: Verarbeitung von Wellpappe, Endverarbeitung, Schneiden und Verpacken, Herstellen von Schreibwaren und Sicherheitsdokumenten sowie Binden von Büchern.
Abteilung Information : BW Papersystems, als Teil des Barry-Wehmiller-Konzerns, stellt Anlagen her, die Papier in Produkte für Verbraucher verwandeln - jeden Tag, auf der ganzen Welt. Wir bieten innovative Technologien, Service und Ersatzteile sowie jahrelange, weltweite Erfahrung in folgenden Bereichen: Verarbeitung von Wellpappe, Endverarbeitung, Schneiden und Verpacken, Herstellen von Schreibwaren und Sicherheitsdokumenten sowie Binden von Büchern.
Your Contribution Manage the maintenance and repair of all production equipment, buildings, building equipment (HVAC, electric, gas, water, etc.) and grounds to ensure optimum performance, minimize down time, support safety, reduce costs, etc.Responsible for utilities (electric, gas, water, etc.) and wastewater treatment.Responsible for site security (guard service, ID badges, contractor/visitor access).Plans, organizes, directs and controls all maintenance activities and programs.Manages the activities of all Maintenance personnel.Orders all required materials and supplies to assure timely completion of jobs.Maintains materials and supplies inventory.Performs all personnel supervision duties, including resolution of personnel problems and reporting to management on performance.Provides for safe and orderly work environment in Maintenance and Wastewater Treatment.Ensures that safe work practices are followed.Develops and maintains preventative maintenance programs for machinery, equipment and facilities.Coordinates new equipment installation with engineering.Administers third party vending including security guard service, cleaning service and landscaping.
For this purpose, you research technical and market‑relevant information, analyse the results and derive targeted measures to ensure and improve service qualityYou work confidently with relevant systems such as ticketing, monitoring and backend systems as well as partner portals. You create, analyse and use KPIs and technical reports to steer and continuously improve operational qualityIn addition, you handle basic technical enquiries related to AC charging infrastructure, perform initial diagnostics, analyse error patterns and initiate appropriate corrective measures.
Our highly specialised consultants can cater to your every wish and expectation and will prepare you for interviews and contract negotiations. Give it a try and learn what the market has to offer – our services are free of charge, non-binding and discreet! We look forward to hearing from you. You develop concepts and participate in feasibility studies to meet technical requirements You perform and take ownership of specific software development tasks, ensuring reviews using checklists and templates You lead work package definition, estimation, and planning, and enhance or document SW unit specifications and designs You review designs and contribute to the SW architecture, defining quality attributes and staying updated with technology trends You conduct root-cause analysis of complex issues and provide bug fixes for post-market software releases You ensure compliance with processes, propose improvements, and stay informed about regulatory and market standards Education in a software related field such as software or electrical engineering Industry experience Proven experience as a Software Engineer with a strong focus on Rust development Solid understanding of Rust's core concepts, including ownership, borrowing, and lifetimes Experience with asynchronous programming in Rust (e.g., using async/await) Familiarity with common Rust libraries and frameworks (e.g., tokio, actix-web, rocket, serde, sqlx) Experience with Linux and Dockers Internal career opportunities World renowned pharmaceutical company International and diverse environment Ihr Kontakt Referenznummer 865359/1 Kontakt aufnehmen Telefon:+41 44 225 50 00 E-Mail: positionen@hays.ch Anstellungsart Freiberuflich für ein Projekt
Ensure reliable and stable interaction between embedded software, electronics, mechanics, and firmwareDevelop intelligent, system-level test concepts to verify overall instrument functionalityAnalyze logs and system data and translate findings into corrective actions or improvementsTake full ownership of issues throughout their lifecycle – from initial detection to final resolutionCollaborate closely with cross-functional development teams and production during complex troubleshooting phasesDeliver validated, high-quality work packages to global Service and Operations teams Bachelor’s or Master’s degree in Electrical Engineering, Mechanical Engineering, or Software EngineeringHands-on testing experience at the intersection of hardware and softwareStrong Linux expertise and proven experience in test automationAnalytical, systematic and curious mindset with the ability to understand complex system interactionsExperience in cross-functional collaboration and structured troubleshootingFluent English skills; German is an advantage Opportunity to work in a modern, agile R&D environment with high technical impactDirect contribution to the improvement and reliability of complex diagnostic instrumentsCollaboration with experienced engineering and development teams in an international setting Ihr Kontakt Referenznummer 862979/1 Kontakt aufnehmen Telefon:+41 44 225 50 00 E-Mail: positionen@hays.ch Anstellungsart Freiberuflich für ein Projekt
Our highly specialised consultants can cater to your every wish and expectation and will prepare you for interviews and contract negotiations. Give it a try and learn what the market has to offer – our services are free of charge, non-binding and discreet! We look forward to hearing from you. You develop concepts and participate in feasibility studies to meet technical requirementsYou perform and take ownership of specific software development tasks, ensuring reviews using checklists and templatesYou lead work package definition, estimation, and planning, and enhance or document SW unit specifications and designsYou review designs and contribute to the SW architecture, defining quality attributes and staying updated with technology trendsYou conduct root-cause analysis of complex issues and provide bug fixes for post-market software releasesYou ensure compliance with processes, propose improvements, and stay informed about regulatory and market standards Education in a software related field such as software or electrical engineering Industry experienceProven experience as a Software Engineer with a strong focus on Rust developmentSolid understanding of Rust's core concepts, including ownership, borrowing, and lifetimesExperience with asynchronous programming in Rust (e.g., using async/await)Familiarity with common Rust libraries and frameworks (e.g., tokio, actix-web, rocket, serde, sqlx) Experience with Linux and Dockers Internal career opportunities World renowned pharmaceutical companyInternational and diverse environment Ihr Kontakt Referenznummer 865359/1 Kontakt aufnehmen Telefon:+41 44 225 50 00 E-Mail: positionen@hays.ch Anstellungsart Freiberuflich für ein Projekt
Ensure reliable and stable interaction between embedded software, electronics, mechanics, and firmware Develop intelligent, system-level test concepts to verify overall instrument functionality Analyze logs and system data and translate findings into corrective actions or improvements Take full ownership of issues throughout their lifecycle – from initial detection to final resolution Collaborate closely with cross-functional development teams and production during complex troubleshooting phases Deliver validated, high-quality work packages to global Service and Operations teams Bachelor’s or Master’s degree in Electrical Engineering, Mechanical Engineering, or Software Engineering Hands-on testing experience at the intersection of hardware and software Strong Linux expertise and proven experience in test automation Analytical, systematic and curious mindset with the ability to understand complex system interactions Experience in cross-functional collaboration and structured troubleshooting Fluent English skills; German is an advantage Opportunity to work in a modern, agile R&D environment with high technical impact Direct contribution to the improvement and reliability of complex diagnostic instruments Collaboration with experienced engineering and development teams in an international setting Ihr Kontakt Referenznummer 862979/1 Kontakt aufnehmen Telefon:+41 44 225 50 00 E-Mail: positionen@hays.ch Anstellungsart Freiberuflich für ein Projekt